Start SF-2200H CNC Cutting System YQ-3030 Plasma Flame Cutting Machine With Arc Voltage Torch Height Controller
This CNC Cutting System 3030 Plasma Flame Cutting Machine is very high efficient.
Beams with larger box type welding structure,the overall good rigidity,high strength,the rail surface must pass through precision machining,ensure the correct positioning of the moving body.
On both ends of the this Table type CNC Plasma Flame cutting machine frame body uses open type double four-wheel contact displacement method,center of gravity eccentric and stable and reliable,and ensure the good dynamic balance.All welding parts heat treatment with can reduce stress,effectively prevent the structure deformation
Models for gantry frame structure,must be whole annealing of eliminating of eliminating of beam with lateral orbital and precision rack.
Main technical specification:
| 1, | Rail space(mm) | 3560 |
| 2, | Effective cutting width(mm) | 3000 |
| 3, | Rail length(mm) | 3500 |
| 4, | Effective cutting length(mm) | 3000 |
| 5 | Max cutting thickness(mm) | 150 |
| 6 | Cutting torch 120 | 1pcs CNC Max thickness 12mm |
| 7 | Max positioning speed(mm/min) | 15000 |
| 8 | Cutting torch lifting height | 180mm |
| 9 | CNC system(Beijing Start SF-2200H) | 2pcs |
| 10 | Longitudinal linear rail | 9pcs |
| 11 | Longitudinal level 7 precision rack | 18pcs |
| 12 | Drag chain | 1pair |
| 13 | Arc pressure type automatic tuning device(domestic cutting torch height controller) | 1set |
| 14 | Stop block | 1set |
| 15 | Electrical control cabinets | 1set |
| 16 | Auto-programming and nesting software(doestic) | 1set |
| 17 | Environment temperature | 0-50℃ |
| 18 | Relative humidity | 95% Non-condensing |
| 19 | Surroundings | Ventilation,no big impact |
| 20 | Supply voltage | 220V/380V±10% |
| 21 | Supply frequency | 50Hz / 60Hz |
| 22 | Input power | CNC system & Driver＜3KW |
Longitudinal of CNC Table type cuttng machine adopts bilateral meshing gear and rack drive, slow down and ac servo system with high precision, has the speed and position feedback function, can set a transmission and high precision.
Drive on both ends of the frame is equipped with horizontal guide wheel, adjustable driving eccentric at the bottom of the rack on the degree of compaction guide rail, to keep the machine in motion stability.
End frame with filter respectively, and the second end face scraping and accumulation in the guide at any time on the surface of the clutter.
Product Tags:
|
|
SF-2200H CNC Flame Plasma Cutting Machine 150mm 10ft Images
|
